Price:Unkonwn

Send inquiry

BLEND POLYOL SDB10D
RIGID PU FOAM FOR PIPE INJECTION INSULATION
DEscriptION
SDB10D is a kind of blend polyol used for pipe insulation system for city heating or cooling. When it combined with isocyanate(PM200) leads to the formation of rigid polyurethane foam by using PU injection foam equipment .The foam formed has the characteristics as following:
The thermal conductivity is low, which can meets the requirements of city heating and energy saving.
Service life of the foam is very long, over 30 years.
High temperature resistance and good dimensional stability of the foam, the highest temperature range is 140 ºC.
TYPICAL PHYSICAL PROPERTIES
importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions.For our products, the data are not legally binding.

Other unmentioned matters and TDS&MSDS.Please visit our official website shundapu.en.made-in-china.com
Or please contact us for information:

Basic Info.

Model NO. SDB10D Gel Time 100-120s Rise Time 160-200 Physical Properities 35~46kg/M3 Compressive Strength 200~300kpa Trademark shunda Transport Package 220kg/Drum Specification Two components Origin China HS Code 39072090

Product Description

Customer Question & Answer Ask something for more details (0)

BLEND POLYOL SDB10D
RIGID PU FOAM FOR PIPE INJECTION INSULATION 
DEscriptION
SDB10D is a kind of blend polyol used for pipe insulation system for city heating or cooling. When it combined with isocyanate(PM200) leads to the formation of rigid polyurethane foam by using PU injection foam equipment .The foam formed has the characteristics as following:

1. The thermal conductivity is low, which can meets the requirements of city heating and energy saving.
2. Service life of the foam is very long, over 30 years.
3. High temperature resistance and good dimensional stability of the foam, the highest temperature range is 140 ºC.

TYPICAL PHYSICAL PROPERTIES

Physical Properities	Test Method	Metric	Value
Core Density	GB/T 6343-2009	kg/m3	≥60
Radial Compressive Strength	GB/T 8813-2008	MPa	≥0.3
Initial Thermal Conductivity(50°C)	GB/T 10294-2008	W/(m·K)	≤0.033
Close Cell Content	GB/T 10799-2008	%	≥88
Water Absorption	GB/T 8810-2005	%	≤10
Air bubbles	GB/T 29047	mm	1/3Insulation thickness.
Average cell size.	GB/T 29047	mm	≤0.5

importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions.For our products, the data are not legally binding.

Other unmentioned matters and TDS&MSDS.Please visit our official website shundapu.en.made-in-china.com
Or please contact us for information: