Send inquiry
General purpose polyurethane foam for cold weatherDescriptions:
1.general purpose polyurethane foam is a one component polyurethane foam used to seal gaps and crevices on window, door etc in cold weather ;
2.The foam that dispenses from the aerosol can is moisture cured and draws humidity from the air for cure;
3.Pu foam is widely used in sealing around doors, windows,pipes,indoor fittings or any other applications in construction.
4.Provides an excellent bond to lumber,plywood,concrete,metals,masonry and other substrates.
Way to apply:
1.Shake can well to make the foam ready for use;
2.Clean the substrate and spray some water on it;
3.Screw foam dispenser on tightly and turn can upside down;
4.Vertical fill the gaps from the bottom upwards;
5.Foam is tack-free(dry to the touch) in 8 to 10 minutes in temperatures between +18°C and + 25 °C(65 °F-77 °F). Higher temperature will result in faster setup times;
6.Remove unwanted cured foam by cutting it with knife.
Features:
Foam Color: white
Tack free time:10minutes
Cut through:One hour
Processing temperature:+5 °C- +35 °C(+41 °F to +95 °F)
Optimum processing:+18°C to +25 °C(+64.4 °F to +77 °F)
Short-term resistance range:-40 °C to +110 °C(-40 °F to +230 °F)
Long-term resistance range:-30 °C to 80 °C(-22 °F to +176 °F)
PU FOAM SAFTY:
1.Keep out of children's reach ;
2.Keep upright;
3.Shelter from direct sunlight;
4.Do not expose to temperatures exceeding 50°c(122°F);
5.Do not pierce or burn even after use;
6.No smoking during the whole spraying procedure.
Read instructions carefully before using. During application avoid contact with skin. Wear gloves ! Can contains small parts of inflammable propellant. Therefore,ventilate carefully during working and avoid open fire and use of electrical equipment etc.
Company Information:
Questions:
1.Can u send sample to us ?
Yes, the sample is free to you .
2.Can you give us private design ?
Yes, the moq with private design is 500cartons; for factory design, the moq is 200cartons
3.What's the payment item?
By T/T, 30% as deposit, the rest to be paid after seeing the BL copy
4.Where is your port?
tianjin/qingdao
5.What's your guarantee?
We guarantee goods quality is same as sample's and what we descrip.
6.Can you provide us your client information ?
Yes, for checking our company reputation and sample collection.
7.How many days you want to produce one 20'container?
Maxinum 15days
8.Can we visit factory?
Yes any time.
9.documents ?
Packing list, commercial invoice, CO / FORM E / FORM A , BL making according to your demand.
Basic Info.
Model NO. SM-555 Characteristic Weatherability Promoter Composition Solvent Composition Organic Material Color White Type Gun/Straw Tack-Free Time 10minutes Cutting Time One Hour Pack 12tin/Carton Design Private Lable Is Acceptable Processing Temperature +5c to 35c Optimum Processing +18c to +25c Features Waterproof, Heat/Cold Preservation, CFC Free Trademark BU SEAL/ SEAL MAX Transport Package 12tin/Carton Specification 300ML, 500ML, 750ML, drum Origin Shandong HS Code 32141090Product Description
Customer Question & Answer Ask something for more details
General purpose polyurethane foam for cold weatherDescriptions:
1.general purpose polyurethane foam is a one component polyurethane foam used to seal gaps and crevices on window, door etc in cold weather ;
2.The foam that dispenses from the aerosol can is moisture cured and draws humidity from the air for cure;
3.Pu foam is widely used in sealing around doors, windows,pipes,indoor fittings or any other applications in construction.
4.Provides an excellent bond to lumber,plywood,concrete,metals,masonry and other substrates.
Way to apply:
1.Shake can well to make the foam ready for use;
2.Clean the substrate and spray some water on it;
3.Screw foam dispenser on tightly and turn can upside down;
4.Vertical fill the gaps from the bottom upwards;
5.Foam is tack-free(dry to the touch) in 8 to 10 minutes in temperatures between +18°C and + 25 °C(65 °F-77 °F). Higher temperature will result in faster setup times;
6.Remove unwanted cured foam by cutting it with knife.
Features:
Foam Color: white
Tack free time:10minutes
Cut through:One hour
Processing temperature:+5 °C- +35 °C(+41 °F to +95 °F)
Optimum processing:+18°C to +25 °C(+64.4 °F to +77 °F)
Short-term resistance range:-40 °C to +110 °C(-40 °F to +230 °F)
Long-term resistance range:-30 °C to 80 °C(-22 °F to +176 °F)
PU FOAM SAFTY:
1.Keep out of children's reach ;
2.Keep upright;
3.Shelter from direct sunlight;
4.Do not expose to temperatures exceeding 50°c(122°F);
5.Do not pierce or burn even after use;
6.No smoking during the whole spraying procedure.
Read instructions carefully before using. During application avoid contact with skin. Wear gloves ! Can contains small parts of inflammable propellant. Therefore,ventilate carefully during working and avoid open fire and use of electrical equipment etc.
| Packing | ||
| Tin | 300ML/500ML/750ML | Gun Type |
| Straw Type | ||
| 12 Tin/Carton;1296cartons/20'container for 750ml | ||
| Remark: can be customized | ||
| Our Service | |
| Pre-sales | Immediate response online. Reply Inquiry by email within 2 hours. Answering phone at any time. Full communication with customers about every detail to win the local market. |
| Selling | Update production and shipping process on time. Quality control. |
| After-sales | Goods quality and service survey. Market feedback studying and improving accordingly. Customer service response at any time, by any way. |
Company Information:
| Company Name: | Yiyang Wonstar Building Material. Co.,Ltd |
| Year Established: | 2011 |
| Products: | Silicone Sealant, Polyurethane Foam, PVC/CPVC Glue |
| Markets: | Middle East, Africa, EU, America, South East Asia,etc |
| Factory Location: | shandong, China |
| Staff No.: | Over 100 |
| Platform: | Alibaba, Made in China, Official Website, Canton Fair and Abroad Fair,etc |
| Ability: | 20 containers a month. |
| Experience: | More than 9 years. |
| Advantage: | High reputation among our customers worldwide all these years on products stable qualities, best reasonable prices and professional, patient services. |
Questions:
1.Can u send sample to us ?
Yes, the sample is free to you .
2.Can you give us private design ?
Yes, the moq with private design is 500cartons; for factory design, the moq is 200cartons
3.What's the payment item?
By T/T, 30% as deposit, the rest to be paid after seeing the BL copy
4.Where is your port?
tianjin/qingdao
5.What's your guarantee?
We guarantee goods quality is same as sample's and what we descrip.
6.Can you provide us your client information ?
Yes, for checking our company reputation and sample collection.
7.How many days you want to produce one 20'container?
Maxinum 15days
8.Can we visit factory?
Yes any time.
9.documents ?
Packing list, commercial invoice, CO / FORM E / FORM A , BL making according to your demand.