Send inquiry
We are professional manufacturer and exporter of polyurethane foam, with the experience of more than 9 years. We are creditable supplier in China and enjoy favorable reputation among our customers from all over the world. Warmly welcome your inquiries. You could rest assured of the satisfied first response from us. We also guarantee to offer the long term stable quality products to you at reasonable profitable reselling prices.Building Material Chemical Adhesive Gap Filling Polyurethane Foam
Features:
1.Construction polyurethane foam is a one component plyurethane foam used to seal gaps and crevices on window, door etc;
2.The foam that dispenses from the aerosol can is moisture cured and draws humidity from the air for cure;
3.Pu foam is widely used in sealing around doors, windows,pipes,indoor fittings or any other applications in construction.
4.Provides an excellent bond to lumber,plywood,concrete,metals,masonry and other substrates.
5.Foam Color: white
6.Processing temperature:+5 °C- +35 °C(+41 °F to +95 °F)
7.Optimum processing:+18°C to +25 °C(+64.4 °F to +77 °F)
8.Short-term resistance range:-40 °C to +110 °C(-40 °F to +230 °F)
9.Long-term resistance range:-30 °C to 80 °C(-22 °F to +176 °F)
Way to Apply:
1.Shake can well to make the foam ready for use;
2.Clean the substrate and spray some water on it;
3.Screw foam dispenser on tightly and turn can upside down;
4.Vertical fill the gaps from the bottom upwards;
5.Foam is tack-free(dry to the touch) in 8 to 10 minutes in temperatures between +18°C and + 25 °C(65 °F-77 °F). Higher temperature will result in faster setup times;
6.Remove unwanted cured foam by cutting it with knife.
Technical Data:
PU FOAM SAFTY:
1.Keep out of children's reach ;
2.Keep upright;
3.Shelter from direct sunlight;
4.Do not expose to temperatures exceeding 50°c(122°F);
5.Do not pierce or burn even after use;
6.No smoking during the whole spraying procedure.
Read instructions carefully before using. During application avoid contact with skin. Wear gloves ! Can contains small parts of inflammable propellant. Therefore,ventilate carefully during working and avoid open fire and use of electrical equipment etc.
Company Information
Basic Info.
Model NO. SM-555 Characteristic Weatherability Promoter Composition Solvent Composition Organic Material Color White Type Gun/Straw Tack-Free Time 10minutes Cutting Time One Hour Pack 12tin/Carton Design Private label Is Acceptable Processing Temperature +5c to 35c Optimum Processing +18c to +25c Features Waterproof, Heat/Cold Preservation, CFC Free Sample Available and Free for Test Shelf Life 12 Months Trademark TIMEFIX / SEAL MAX Transport Package 12tin/Carton Specification 300ML, 500ML, 750ML Origin China(Mainland) HS Code 32141090Product Description
Customer Question & Answer Ask something for more details
We are professional manufacturer and exporter of polyurethane foam, with the experience of more than 9 years. We are creditable supplier in China and enjoy favorable reputation among our customers from all over the world. Warmly welcome your inquiries. You could rest assured of the satisfied first response from us. We also guarantee to offer the long term stable quality products to you at reasonable profitable reselling prices.Building Material Chemical Adhesive Gap Filling Polyurethane Foam
Features:
1.Construction polyurethane foam is a one component plyurethane foam used to seal gaps and crevices on window, door etc;
2.The foam that dispenses from the aerosol can is moisture cured and draws humidity from the air for cure;
3.Pu foam is widely used in sealing around doors, windows,pipes,indoor fittings or any other applications in construction.
4.Provides an excellent bond to lumber,plywood,concrete,metals,masonry and other substrates.
5.Foam Color: white
6.Processing temperature:+5 °C- +35 °C(+41 °F to +95 °F)
7.Optimum processing:+18°C to +25 °C(+64.4 °F to +77 °F)
8.Short-term resistance range:-40 °C to +110 °C(-40 °F to +230 °F)
9.Long-term resistance range:-30 °C to 80 °C(-22 °F to +176 °F)
Way to Apply:
1.Shake can well to make the foam ready for use;
2.Clean the substrate and spray some water on it;
3.Screw foam dispenser on tightly and turn can upside down;
4.Vertical fill the gaps from the bottom upwards;
5.Foam is tack-free(dry to the touch) in 8 to 10 minutes in temperatures between +18°C and + 25 °C(65 °F-77 °F). Higher temperature will result in faster setup times;
6.Remove unwanted cured foam by cutting it with knife.
Technical data:
| Item | SM-555 |
| Specific Gravity | 20±2 |
| Tack-Free Time (min) | 10-15 |
| Drying Time | Dust-free after 20-25 min. |
| Cutting Time (hour) | 2-2.5 |
| Yield (L) | 55 |
| Cellular Structure | 70% close cells |
| Shrink | No |
| Temperature Resistance | -40ºC to +80ºC |
| Fire Class | B3 |
| Tensile Bond Strength (Kpa) | Aluminum Board >80 |
| Tensile Bond Strength (Kpa) | PVC Plastic Board >60 |
| Tensile Bond Strength (Kpa) | Cement Mortar Board >60 |
| Shelf Life (+5 to +25) | 12 months |
| Packing | ||
| Tin | 300ML/500ML/750ML | Gun Type |
| Straw Type | ||
| 12 Tin/Carton | ||
| Remark: can be customized | ||
| Shipping | |
| By Express Company | e.g.DHL, UPS, FEDEX, EMS, TNT. Door to Door |
| By Sea | Terms: EXW, FOB, CNF, CIF, DDU, DDP, etc |
| By Air | Airport to Airport |
| Remark: | We can help arrange the shipment accordingly after discussing the best shipping way with customers. |
PU FOAM SAFTY:
1.Keep out of children's reach ;
2.Keep upright;
3.Shelter from direct sunlight;
4.Do not expose to temperatures exceeding 50°c(122°F);
5.Do not pierce or burn even after use;
6.No smoking during the whole spraying procedure.
Read instructions carefully before using. During application avoid contact with skin. Wear gloves ! Can contains small parts of inflammable propellant. Therefore,ventilate carefully during working and avoid open fire and use of electrical equipment etc.
Company Information
| Company Name: | Yiyang Wonstar Building material. Co.,Ltd |
| Year Established: | 2011 |
| Products: | Silicone Sealant, Polyurethane Foam, pvc glue |
| Markets: | Middle East, Africa, EU, America, South East Asia,etc |
| Factory Location: | shandong, China |
| Staff No.: | Over 100 |
| Platform: | Alibaba, Made in China, Official Website, Canton Fair and Abroad Fair,etc |
| Ability: | 20 containers a month. |
| Experience: | More than 9 years. |
| Advantage: | High reputation among our customers worldwide all these years on products stable qualities, best reasonable prices and professional, patient services. |
