Send inquiry
Our company faces the whole country [door-to-door cash settlement], long-term and large-scale recovery of various overstocked chemical raw materials, chemical additives, dyes, pigments, paints, resins, silicone oils, silicone rubber, rubber additives, plastic additives, Japan Chemical raw materials, paint and coating raw materials additives, pesticide raw materials, intermediates, printing and dyeing auxiliaries, electroplating auxiliaries, direct fluorescent yellow, permanent violet, lithium carbonate, cobalt acetate, cobalt alkoxide, cobalt oxalate, cobalt neodecanoate Paint, ink, rubber, hot melt adhesive, paraffin wax, flavor, Anyang recycling release agent Isocyanate, Anyang Recycling Release Agent Chemical raw materials, thermoplastic elastomers, color masterbatches, copolyformaldehyde, paraformaldehyde, surfactants, sodium alginate, organic bentonite, petrolatum, sodium lauryl sulfate, cellulose, vanillin, Anyang recycling and demoulding Agent-Anyang professional door-to-door recycling release agent call menthol, urotropine, melamine, disodium EDTA, tetrasodium, whey protein, lanolin, polyvinylpyrrolidone, myristic acid, sebacic acid, trimethylol Propane, sodium hydroxide, gas phase white carbon black, oleic acid amide, erucamide, polyacrylamide, acrylamide, caprolactam, maleic anhydride, phthalic anhydride, hydroquinone, resorcinol, Anyang recovery release agent- Anyang professional door-to-door recycling mold release agent phone catechol, trimellitic anhydride, succinic anhydride, pentaerythritol, neopentyl glycol, polyethylene glycol, photoinitiator, Anyang recycling mold release agent-Anyang professional door-to-door recycling mold release agent phone Ni Ethyl and propyl butyl, sodium benzoate, thiourea, hot-melt adhesive, guar gum, xanthan gum, carrageenan, pectin, malic acid, bisphenol flat O, styrene-acrylic emulsion, acrylic emulsion , Tannic acid, H acid, lauric acid, fumaric acid, salicylic acid, tartaric acid, mannitol, citric acid, xylitol, stearyl alcohol, fatty alcohol, adipic acid, stearic acid, fatty acid, Oxalic acid, boric acid, Tween spar, leveling agent, defoaming agent, dispersing wetting agent, the intermediary must thank you, Anyang recycling mold release agent-Anyang professional door-to-door recycling mold release agent phoneBut these waste paints still have useful value. Waste paints can be recycled, processed and reused. After the waste paints are recovered, they can be reprocessed and put back into use. It is the material of ***. You need to find a regular waste paint recycling company, but you need to know that one of the waste paint treatments cannot be recycled, that is, the paint that becomes solid has no recycling value. There is no uniform standard for the treatment price, and the price is usually determined according to the quality of the waste paint. The quantity is high and the price is high. I would like to remind the people that waste paint is a huge hazard and must not be dumped indiscriminately. You can find a regular recycler to recycle it to avoid environmental pollution.
3. If cracks appear, it is most likely to use a chemical paint remover or hot air spray gun to remove the paint, and then paint again. If the fracture area is not large, sandpaper can be used to polish off the paint on the fractured part. After polishing the surface smoothly, paint again. 4. Paint sagging. If the paint is too thick at one time, it will cause sagging. You can open the spray gun while the paint is still dry. If the paint has begun to dry, use sandpaper to smooth the paint surface. , Brush the surface clean, wipe it clean with a damp cloth, and then paint again. 5. The reason for the loss of gloss is that the primer is not applied, or the primer, that is, the inner paint, is directly applied before it is dried. As a result, the glossy paint does not absorb and loses its luster.
If it is recycling, it can give users a high price, but in the recycling process, it is often very troublesome for users, or the two cleaning after recycling can not satisfy users, and under such circumstances , The users are not satisfied, and they will choose their waste paint recycling company to serve themselves, so this is also a service, so a good company not only has good strength, but also has a good service concept. This is the only way , only in the service, can really improve the competitiveness, and at the same time create better value for your company.
There are several steps in the treatment of waste paint. First, the waste paint after recycling needs to be classified without mixing. At the same time, the waste paint can be put into a rectangular sink, and double water is added, and then a certain amount of special solvent is added to soak it. Two days, if the air flotation coagulant in the waste paint is added, it is obtained when soaking. Traditional waste paint recycling technology can no longer meet the current development needs. Specialized waste paint recycling companies have professional recycling technology, which has changed the traditional paint recycling principle from the foundation. Now the waste paint recycling generally uses the paint mist recycling method. After the waste paint is recycled, after treatment, if the gloss is found to be poor, an appropriate amount of brightener should be added. These can be applied to some exterior paintings such as car repair shops, carriages, bridges, etc., usually there is no difference from new paint, and The cost is only half of the new paint.
The highest value for the recycling of used paint is the inventory of scrapped paint. The inventory is especially expired due to time, but it is not opened. It can be used directly after recycling, so the value is the highest. Of course, it is best if the colors are the same.