| Material: | Neoprene | Pattern: | Emulsion |
| Apply: | Vehicle | Model: | Felix-1908 |
| Packaging: | buckets | Features: | No wire drawing, high temperature resistance, no benzene and no aldehyde |
| Viscosity: | 100-500 | Yield: | 666 |
Detailed introduction of "Automotive interior adhesive Felix-1908 benzene-free and aldehyde-free"
Auto interior adhesive Felix-1908 benzene-free and aldehyde-freeBasic introduction Auto interior adhesive< /span>Felix-1908 strong>It is a one-component solvent-based neoprene series adhesive, suitable for automotive interiors, with non-drawing, water resistance, high temperature resistance, fast drying, adhesion strong characteristics. Because it is a one-component series product, it has good workability, no need to stir, and easy on-site management. It is a one-component adhesive with excellent technical performance and workability. Automotive interior adhesive Felix-1908 benzene-free and aldehyde-free performance characteristics Benzene-free, aldehyde-free, non-drawing, water-resistant, high-temperature resistant, fast drying, strong adhesion Automotive interior adhesive Felix-1908 benzene-free and aldehyde-free technical parameters
Automotive Interior Adhesive Felix-1908 Benzene-Free and Aldehyde-Free Instructions for Use
painting requirements
Sufficient spray amount and uniform particles;
If conditions permit, it needs to be dried at the set temperature and time. Knot effect ability.
Gluing method
Recommended gun size1.0 -2.0mm, air pressure3-5kg/ m< /span>2;
Clean the sprayer in time after spraying: use ethyl acetate or special thinner .
Automotive interior adhesive Felix-1908 benzene-free and aldehyde-free Purchase instructions1、 When spraying, the nozzle of the spray gun should not be too close to the surface of the object to be sprayed, because the glue is easy to agglomerate, uneven or penetrate into the object. The mouth of the spray gun should not be too far from the surface of the object to be sprayed, and the recommended distance is 25-50cm.
2、The surface of the adherend should be clean and free of oil, water, dirt, rust, and the surface should be dry and free of moisture. Pay attention to whether the surface of the adherend is clean during construction in rainy and rainy weather. Dry, otherwise it will cause non-stick phenomenon.
3、This product contains organic solvent, which is volatile and combustible. Store in a cool and ventilated place and keep away from fire. (Section 3 Flash point liquids in the class,UN Number:1133).
4、After opening, please seal the unused part. Shake well before use.
5、Shelf life:1years.