| In stock: | Yes | Material: | Neoprene |
| Category: | Milky | Pattern: | Emulsion |
| Apply: | Rubber | Model: | Chloroprene |
| Specifications: | Chloroprene | Trademark: | - |
| Packaging: | Iron Bucket | Yield: | 1000000 |
Detailed introduction of "Flame-retardant Neoprene Adhesive for Hebei Metro Shield Cement Segment"
Hebei Metro Shield Flame retardant neoprene adhesive for cement segmentBasic introductionFlame-retardant neoprene adhesive for subway shield cement segments
Flame-retardant neoprene adhesive for subway shield cement segment is a single-group self-adhesion or mutual-adhesion of metal, rubber, plastic, wood, concrete, ceramics, fabric and leather, etc. Solvent evaporation drying type adhesive.
Flame-retardant neoprene adhesive for subway shield cement segmentsUses
Suitable for bonding rubber, leather, canvas, fabric, wood, metal, plastic ceramics, paper, etc., used in machinery production, car, shipbuilding, household appliances, instrumentation, shoemaking, furniture production, construction, decoration and other industries,
Flame-retardant neoprene adhesive for subway shield cement segmentsUpstream materials
p-tert-butylphenol formaldehyde resin, , neoprene, gasoline.
Flame-retardant neoprene adhesive for subway shield cement segmentsFeatures
It is a one-component solvent evaporation drying adhesive for self-adhesion or mutual adhesion of metal, rubber, plastic, wood, concrete, ceramics, fabrics and leather, etc.
Flame-retardant neoprene adhesive for subway shield cement segmentApplication method
1. First remove the rust, oil and dust on both sides of the adherend. Lubricate the surface Use sandpaper (wood rasp for rubber) to roughen and wipe clean.
2. Apply a thin layer of glue on the surface of the bonding, and leave it out until it is completely non-sticky (about 10 to 20 minutes). Then press it down. General materials require 1~2 times of glue, porous materials require 2~3 times, and each exposure time is 10~20 minutes. Glue amount 150~250gm2.
3. Cure for several hours at room temperature 25°C.
Flame-retardant neoprene adhesive for subway shield cement segmentStorage, transportation and precautions:
1. This product contains organic solvents and should be kept in a cool and dry place. It must be stored and transported as risk goods. For the safety performance, please refer to the "Chemical Safety Skills Manual" of the relevant products of our factory.
2. After the glue is used, it should be covered at any time to avoid evaporation of the solvent. If the viscosity becomes thick and it is inconvenient to apply the glue, a little ethyl acetate solvent can be added for dilution.
3. The gluing tools can be used oil brushes, brushes, knives, wooden strips, etc. After use, they can be immersed in the above solvent for cleaning.
4. The storage guarantee period of this product is one year. After the expiration date, it can still be used continuously after passing the inspection. 
