| Brand: | Shenghai | Filter form: | Pleated filter element |
| Performance: | Acid and alkali resistant | Purpose: | Water Filtration |
| Type: | Pleated Microporous Filter | Material: | Polypropylene |
| Applicability: | Filter | Operating Temperature: | ≤80℃ 0.1Mpa |
| Working Differential Pressure: | 0.25Mpa at 50℃ |
Detailed introduction of "pet release film coated adhesive filter pleated filter element"
pet release film coated adhesive filter pleated filter elementProduct introduction:
Coated pleated filter element can provide various standard interface forms such as 222, 226, flat seal, fin, triangular tip, etc. The lengths are 5 inches, 10 inches, 20 inches, 30 inches, 40 inches and other lengths. For customers with special needs, we can provide customized filter layers and lengths. This filter element can reduce the dark lines of crystal dots in the film during the coating process, remove the bubbles in the glue, and remove the tiny impurities and gels in the glue.
pet离型膜涂布胶黏剂过滤 折叠滤芯特性：
Excellent chemical compatibility, suitable for filtration, strong alkalis and organic solvents
The filter membrane is pleated depth filtration, with a large membrane filtration area
Low pressure difference, strong dirt holding capacity, long service life
· Wider filter precision to choose from
pet release film coated adhesive filtration pleated filter elementApplication fields:
Food and beverage industry: filtration of wine, mineral water, drinking water
· Petroleum industry: oil field water injection filtration
· Chemical industry: filtration of various organic solvents, acids and alkalis
pet release film coated adhesive filter pleated filter elementTechnical parameters:
· Filtration accuracy: 0.1um 0.2um 0.45um 1um 3um 5um 10um 20um 30um 50um
· Filter element length: 5"/10"/ 20"/ 30"/ 40"
If there are special circumstances, it can be customized, everything is subject to the needs of customers, and the quality is guaranteed.
· Filter element diameter: 69mm 81mm 152mm
· Filter element inner diameter: 33mm
· Trial PH value: 1-12
· Interface: 226; 222; 224; 220; 215;
· Interface method: flat pressure type; fin type; three-piece type; meltblown plug. 5 inch microporous pleated filter element-5 inch PP pleated filter element
·Test: Each filter element has passed the 25℃ pure water integrity test according to the requirements of national GMP conditions.
·Pressure difference: forward 4.2bar; reverse 2.1 bar
·Filter area: ≥0.5㎡ per 10 inches
·Working temperature: ≤80℃ at 0.1Mpa
·Working pressure: 0.25Mpa at 50℃
· Back pressure difference: ≤0.2 Mpa at 25°C
· Disinfection temperature: 120°C for half an hour each time