Send inquiry
Silicone defoamer-Xingtai Zhangjiakou factory direct hair polyaluminum chloride, polyacrylamide, coagulant, flocculant, sludge dehydrating agent, coal water separator, chemical mud powder ①Anionic polyacrylamide entity production factory direct sales ②All the products have good reputation. ③The price is advantageous. The value of Biyuan Water Purification Cationic Polyacrylamide is often used in many aspects of the product itself, and the reason why polyacrylamide is called "Baiye additives" in the water treatment industry , Also because its products have been well applied and effective in all walks of life, bringing benefits to enterprises. To explain to everyone the use of polyacrylamide in all walks of life. With the rapid economic development, the discharge of urban sewage is increasing. If urban sewage is not purified, it will cause great pollution. Therefore, in many urban sewage treatment plants, cationic polyacrylamide is used as a sludge sewage treatment agent. Special cationic polyacrylamide flocculant for municipal sewage treatment plants. The appearance of cationic polyacrylamide (CPAM) is white powder, and its ion degree ranges from 20% to 55%. It has good water solubility and can be dissolved in water in any proportion and is insoluble. It has the characteristics of high polymer electrolyte and is suitable for the treatment of waste water with negative charge and rich in organic matter. It is suitable for the treatment of wastewater with high organic colloid content in industries such as dyeing, papermaking, food, construction, metallurgy, beneficiation, coal powder, oil field, aquatic product processing and fermentation, especially suitable for urban sewage, urban sludge, papermaking sludge and other industries Dewatering treatment of sludge. Polyacrylamide for Zhangjiajie Sand Washing Plant
For sludge dewatering, the corresponding model of polyacrylamide can be selected according to the nature of the sludge, which can effectively dewater the sludge before the sludge filter press. When dewatering, it produces large flocs, does not stick to the filter cloth, and does not disperse during the filter press. The mud cake is thicker, the dehydration efficiency is high, and the water content of the mud cake is below 80%.
It is used for the treatment of domestic sewage and organic waste water. This product exhibits positive electricity in a matching or alkaline medium, so that it can flocculate and settle the sewage with negatively charged suspended particles in the sewage, and it is very effective for clarification. For example, the production of grain alcohol wastewater, papermaking wastewater, municipal sewage treatment plant wastewater, beer wastewater, monosodium glutamate factory wastewater, sugar wastewater, high organic content wastewater, feed wastewater, textile printing and dyeing wastewater, etc., the use of cationic polyacrylamide is better than the use of anion, The effect of non-ionic polyacrylamide or inorganic salt is several times or tens of times higher, because this kind of waste water is generally negatively charged. Hebei mud fast sedimentation agent
The flocculant is used for the treatment of tap water with river water as the source of water. The amount is small, the effect is good, and the cost is low, especially when combined with inorganic flocculants, the effect is better. Flocculant. Enhancer and other auxiliary agents for papermaking. The retention rate of fillers, pigments, etc., and the strength of the paper. Used in oilfield economics aids, such as clay anti-swelling agent, thickening agent for oilfield acidification. Used for textile sizing agent, sizing performance, less sizing, low rate of fabric breakage, smooth cloth surface.
Organic silicon defoamer-Xingtai Zhangjiakou factory direct hair water quality test COD is the amount of oxidant consumed when water samples are treated with a certain strong oxidant under certain conditions. It is an indicator of the reducibility of the water. The reducing properties in water include various organics, sub-salts, sulfides, ferrous salts, and so on. But the main thing is organic matter. Therefore, chemical oxygen demand (COD) is often used as an index to measure the organic content of water. The greater the chemical oxygen demand, the more serious the pollution of the water body by organic matter. For the determination of chemical oxygen demand (COD), the measured value varies with the determination of the reducibility in the water sample and the measurement. At present, the acid oxidation method and potassium dichromate oxidation method are widely used. The (KMnO4) method has a low oxidation rate, but it is relatively simple. It is used to determine the relative comparison value of the organic content in the water sample and clean surface water