| In stock: | Yes | Authentication: | Enterprise Standard |
| Type: | Organosiloxanes | Performance: | Alkali-resistant defoamer |
| Apply: | Industrial Cleaning | Pattern: | Liquid |
| Model: | XP1036p | Specifications: | Milk white liquid |
| Packaging: | 25kg/barrel |
"Luoyang Xipeng XP1036P Silicone Polyether Defoamer" is introduced in detail
XP1036P high purity silicon polyether defoamer
1. Product characteristics
XP1036P high-purity silicon polyether defoamer is a nearly active dilutable defoaming concentrate. A small amount of use can achieve the desired persistence of a defoamer. Used in metalworking fluids, industrial cleaning, coolants, etc.
Characteristics
The substance composition does not contain NP, APEO;
The substance composition does not contain the substances mentioned in the SVHC list of REACH regulations;
The substance composition does not contain ROSH directive (electrical , Substances contained in the Directive on Restriction of the Use of Certain Hazardous Substances in Electronic Equipment.
Composition
Consists of polyether, synergist, dispersant, etc.
2. Typical product data
Index Physical and chemical properties Test method
Appearance Milky white liquid at room temperature Visual inspection
Viscosity (25℃/mPa.s) 2000-40000 GB/T5561-2012
Note : The above data are for reference only, not as technical indicators;
III. Suggestions for use
(1) This product is a mixture, and there may be stratification or a little precipitation during the storage period, which is a normal phenomenon. It is recommended that the user should stir a little before use (the stirring speed is 30rpm-60rpm), which will not affect the use effect.
(2) This product can be diluted with thickening water. During the dilution process, the stirring speed is 30rpm-60rpm, and the recommended stirring time is no more than 10min. Please ask the customer service department of the company for the specific dilution method. The company will not be responsible for the adverse consequences caused by the incorrect use of the product.
(3) When this product is used on site, it is recommended to choose the place where the defoamer is easily dispersed.
The addition point, addition amount, addition method and dilution ratio need to be decided by the customer according to the actual situation on site.
4. Packaging and storage
XP1036P series defoamer is packaged in 50kg or 1000L ton barrels, if there are special requirements, it can be negotiated and customized.
This product should be sealed and stored at 5℃~40℃, and should not be exposed to sunlight or close to heat sources. Do not add acids, alkalis, salts and other substances to this product. Store in accordance with general chemical methods. After use, ensure that it is sealed to avoid deterioration.
Shelf life is 6 months from the date of manufacture in unopened packaging under recommended storage conditions.