Price:Unkonwn
Send inquiry
Product Details
Made in China.com reminds you: Please store and use in accordance with the chemical safety data sheet (MSDS/SDS). Improper transportation, use or storage may cause perso
nal and enviro
nmental safety risks. The generated hazardous waste should also be handled by professio
nal institutions.
"Flame retardant TPEE rated flame Korea Cologne KP3340 thermoplastic polyester elastomer TPEE" parameter description
| In stock: |
Yes |
Type: |
TPEE |
| Grade: |
KP3340 |
Processing Level: |
Injection Grade, Extrusion Grade |
| Feature Level: |
Flame Retardant |
Usage Level: |
Auto parts, tube grades, electrical and electronic parts |
| Manufacturer (Origin): |
Cologne, South Korea |
|
|
Detailed introduction of "Flame Retardant TPEE Rated Flame Korea KP3340 Thermoplastic Polyester Elastomer TPEE"
Flame Retardant TPEE Rated Flame Korea Cologne KP3340 Thermoplastic Polyester Elastomer TPEE< /span>
| Physical Properties |
Rated Value |
Unit System |
Test method |
| Specific gravity |
1.15 |
g/cm³ |
ASTM D792 |
| Melt flow rate (melt flow rate) (200°C/2.16 kg) |
17 |
g/10 min |
ASTM D1238 |
| Shrinkage - Flow |
1.1 |
% |
ASTM D955 |
| Water Absorption (Equilibrium, 23°C, 60% RH) |
0.70 |
% |
ASTM D570 |
| Hardness |
Rated Value |
Unit System |
Test method |
| Shore Hardness (Shore D) |
40 |
|
ASTM D2240 |
| Mechanical Properties |
Rated Value |
Unit System |
Test method |
| Tensile Strength (Yield, 23°C) |
20.6 |
MPa |
ASTM D638 |
| Elongation (Yield, 23°C) |
920 |
% |
ASTM D638 |
| Flexural Modulus (23°C) |
95.1 |
MPa |
ASTM D790 |
| Taber Abrasion Resistance (1000 Cycles, CS-17 Wheel) |
3.00 |
mg |
ASTM D1044 |
| Impact performance |
Rated Value |
Unit System |
Test method |
| Notched Izod Impact Strength |
|
|
ASTM D256 |
| -40°C |
No Breaks |
|
ASTM D256 |
| 23°C |
No Breaks |
|
ASTM D256 |
| Thermal Properties |
Rated Value |
Unit System |
Test method |
| Heat deflection temperature under load (0.45 MPa, unannealed) |
65.0 |
°C |
ASTM D648 |
| Brittleness temperature |
<-70.0 |
°C |
ASTM D746 |
| Peak Melting Temperature |
170 |
°C |
ASTM D3418 |
| Flammability |
Rated Value |
|
Test method |
| UL Flammability Rating |
HB |
|
UL 94 |
| Additional information |
Rated Value |
Unit System |
|
| Resilience |
67 |
% |
Reminders:Because the plastic market fluctuates every day, some quotations on the page may be different from the actual quotations of the day. beg to be excused!
Contact customer service.
